[SOLVED] Unifi AP Connection Problems via SSH Networking Spiceworks
[Solved] Unifi Ap Connection Problems Via Ssh - Networking - Spiceworks. Once an ap has been adopted by a unifi network controller, the ssh credentials will be part of your controller’s configuration for each specific site, the port to use in this case will also be 22.to get the credentials, access your controller (if you don’t have a controller yet, you can create one here), go to settings > site. In my case i only had to reset 2 ap's, one at each site.
Uninstall unifi from windows or macos. This worked 100% of the time. Connecting via ethernet to the switch, i get an ip on my laptop via dhcp. In my case i only had to reset 2 ap's, one at each site. Unifi aps don't get dynamic ips on boot. Unifi ap ac lite ssh password. In the unifi setup wizard restore the backup from step 1. Before that, ssh into the ap from a different box and check out /var/log/messages (do vi /var/log/messages or cat /var/log/messages) and see if there is anything useful in there. If the file is too large you can just reboot the ap and that should clear the log, then go fail the ssh login again and see what it shows. And here’s a shot of the secure.
2017 at 15:42 utc.da_schmoo wrote: The second one made it through the upgrade process but is now stuck on provisioning. All of the ports are configured the same way on the unifi switch. It sat on a shelf for a few days until i found a use for it elsewhere. 1 found this helpful thumb_up thumb_down. Connectivity issues generally fall into one of the two groups: And here’s a shot of the secure. After a little while it will show up in the unifi ui. When you connect to your udm pro (or another controller that is running unifi os), then you will have a couple of other options: Native network is lan, but also tagged for vlan20. If the file is too large you can just reboot the ap and that should clear the log, then go fail the ssh login again and see what it shows.
